MK1

The MK1 Jig-Saw provides a combination of accuracy & simplicity. Uses short (95mm - 31/4") Jigsaw blades for rigidity. Solid cast iron construction for reduced vibration.

MK2

The MK2 Jig-Saw provides a combination of accuracy & speed. Uses short jigsaw blades clamped top & bottom for rigidity.

PEMA Bridger

Enables steel rule up to 6pt creasing to be norched with minimum effort. Pre-bent and curved rule can be notched without obstruction. Dept of notch adjustable up to 19mm. Standard notch 6mm or 10mm width.

PEMA Lipper

Large mechanical advantage enables 2pt and 3pt rule to be cut and lipped with minimum effort. Lips and cuts any height of rule up to 30mm high and any length down to 2mm Designed to produce left and right lips in one operation.

PEMA Cutter

Maximum flexibility, accuracy and consistency in the cutting of steel rules up to 4pt in thickness. The cutter can be used on any height of rule up to 40mm.

PEMA Bender

Large mechanical advantage means that rule up to 6 pt ( 2mm) soft can be accomodated. Tight and multiple bends can be produced without complications.

UnicA

The UnicA is the first "all-in-one", integrated machine for diemakers. The rule is cut, lipped, notched and bent in order to be fitted directly into the dieboard. All operations are carried out in the one machine.

ELSA

ELS 919: the most popular processor.ELS 919 can work 0,5 mm, 2,3 and 4 Pt steel rule from 12 to 30 mm high !

ELBA

The ELBA is an automated rule bender that utilises data from your existing CAD files to produce formed rule to a high degree of repeatable accuracy.